- cloth or non-scratch sponge
- A soft nylon brush
- A bowl for parts approved for soaking
- A clean drying towel
1. Switch Off and Let Everything Cool
Turn all burner controls off and wait until the hob, grates, and burner caps are completely cool.
Check your manual before removing components. Only lift off parts intended for routine cleaning; do not disconnect gas fittings.
2. Remove Loose Food Residue
Lift away the removable grates and caps. Wipe up crumbs and loose debris with a soft cloth.
Keep the parts grouped by burner
so each cap returns to its matching position.
3. Wash the Removable Parts
Clean approved components with warm, soapy water and a soft sponge.
If your manual permits soaking, leave the removable caps and grates in soapy water for the recommended period to soften grease. Do not assume every burner component can be submerged: some designs specifically prohibit soaking.
4. Gently Loosen Stubborn Deposits
Use a soft nylon brush or non-scratch sponge to work on softened residue. Repeat the permitted cleaning process rather than scraping aggressively.
Avoid knives, steel wool,
and harsh abrasives that could damage the finish. For persistent deposits, choose a cleaner approved for your particular burner material.
5. Check the Burner Openings
Food residue can obstruct burner ports and affect the flame. Follow the manual’s specific instructions for clearing them.
Do not force tools into openings or enlarge them. Wipe the surrounding hob carefully without flooding the ignition components.
6. Rinse and Dry Thoroughly
Remove all cleaning residue from washable parts. Towel-dry them, then allow remaining moisture to evaporate before reassembly.
Wet or incorrectly positioned burner components
can cause repeated clicking or difficulty lighting.
7. Reassemble Carefully
Return each component to its correct position. Burner caps should sit flat and securely on their matching bases.
Once everything is dry and correctly assembled, check operation according to the manual. If ignition problems continue, stop using the affected burner and arrange servicing.
Keep Future Cleaning Simple
Wipe away spills once the hob has cooled, and clean removable caps regularly. Frequent gentle cleaning helps prevent thick deposits from developing.
The goal is clean, properly functioning burners. Heat discoloration and wear
may remain even after grease and food residue have been removed.
